Disclaimer: I am not responsible to anything happening to your device while performing these steps. Take everything on your own risk as you are the owner of your device.
NOTE:
- IMEI Change is Illegal, So restore only with the IMEI you've got in the box.
- Don't contact me if your device fails to work.
- This guide is only for that users those who have Lost their IMEI numbers during improper flashing.
- Perform all the operations and all the steps carefully, Everyone is Noob so therefore don't leave any step unattended.
Lets begin,
PRE-REQUISITES!
1. A Laptop/PC
2. USB CABLE
3. Unlocked bootloader - REDMI NOTE 3
4. USB DEBUGGING ENABLED
5. ADB DRIVERS
6. DEVICE DRIVERS
7. Some BRAINS :P
Download ADB Drivers and Write IMEI Application:
Drive Link : https://goo.gl/oMGGXb
- Install ADB from the driver link mentioned above.
- Plug in your USB, Make sure USB debugging is enabled in Developer Options.
- Open ADB folder press SHIFT button and the right-click mouse button and choose Open Command Prompt Here!
- adb shell
- su
- setprop sys.usb.config diag,adb
- After the above commands, You will see DIAG COM Port on your Device manager - It ll be of different names, Don't worry
- Extract WriteDualIMEI_W_G_eMMC_Champroxx.zip [Which is downloaded from drive]
- Run WriteDualIMEI_W_G_eMMC exe
![]() |
| The Tool Looks Like This! |
- Input the IMEI 1 and IMEI2 [Find this in your Phone Box]
- Click Start and You're done :)
![]() |
| Your IMEI is back! |
Reboot your device and check the IMEI using *#06#
Good Luck, If there's any need ping me on the comments below!


Yes Brother. Thanks ✌️ ll improve in my upcoming posts.
ReplyDelete